$0.01 each

Want an extra fob? (1 supplied with system)




  1. Features
  2. FAQ's
  3. Manuals
  4. Specs
  5. Reviews
  6. Keyless Accessories
  7. Videos

No more keys

Just imagine, No More Keys!

No more taking your gloves off and on to search your pockets for keys. more keys to scratch your paint, to fumble with or fall out of the lock or your pocket and lose. But it gets better! When you "Go Keyless" you no longer have an Ignition switch to lock, look at or deal with at all.

Easy install

Easy Installation!

Simply disconnect the Ignition and Accessory wires from your existing Ignition Key switch and attach them to the KIM-U power harness. Next locate the two wires coming from the right hand control harness that are connected to the bikes Run / Stop switch, Connect the KIM – U control wires to these, Lastly attach the systems ground wire and installation is complete.


RFID Dawg Tag

RFID (Radio-Frequency Identification Device) Dawg Tags provide completely "Hands Free" operation of your bikes ignition. Dawg Tags are motion activated and will only authorize your Ignition to operate when you are within a range. Each Tag is completely unique with over 6 billion different code combinations. Dawg Tags can be cross-programmed allowing one tag to operate multiple bikes. You can also easily select between Automatic or Manual modes, via the Dawg Tag, giving you complete control of how and when the system arms and disarms.

Keyless convenience

Keyless Convenience

Think how awesome it would be to just "get on and go, then get off and walk away" always knowing your bike is completely secure without ever needing a key again. One day all bikes will be keyless, but if you’re a rider who likes being at the head of the pack, then the Digital Guard Dawg™ Keyless Ignition Module can bring you tomorrow’s technology today. Losing your keys has never felt so good!

No wire cutting

Simple "Plug and Play" installation

Check out one of our new Plug & Play install harnesses, now available for over 30 popular models and just plug your Keyless system in to your bike without cutting even one wire!

Advanced design

Advanced Design

Through extensive use of micro electronics the DGD-KIM boasts huge features in a tiny package. New state-of-the-art high load micro relays independently switch Ignition and Accessory circuits providing optimum power handling and control. Sealed within a specially formulated RTV compound to protect from moisture and dampen vibration, Total module size is only 1½" X 1½" X 2" allowing it to mount virtually anywhere.

Strong security

Strong Security

When we say secure we mean it! Unlike most common alarms that simply interrupt the starter circuit and can be easily defeated. The system becomes the gateway for all your bikes electrical, so when the DGD-KIM arms, every circuit on your bike is completely immobilized! No other product gives you this level of protection.

24/7 support

Never Get Stranded

Should you ever damage or lose your Dawg Tag don't even worry.
We can get your started right over the phone! Just call or 24/7 Emergency Hotline and we will be happy to get you back on the road.

Quality engineered products

Quality Engineered

The DGD-KIM has been engineered to perform in the absolute harshest of environments. Our sealed control module is built using military grade FR-4 circuit boards populated exclusively with ultra low profile SMT components for extreme ruggedness and minimal resonance under high vibration. All DGD-KIM systems are rigorously tested to insure consistently superior product quality and are manufactured to meet rigorous ISO 9001 and TS16949 OEM automotive certifications.

How many Dawg Tags come with a system?

Each Digital Guard Dawg System comes with (1) Dawg Tag included. You can purchase extra Dawg Tags and program up to (4) per system. Extra Dawg Tags can be added any time. You can also program a single tag into multiple systems so that you can operates all you Motorcycles or Vehicle by carrying just one Dawg Tag.

Does the Bike Shut off When I walk away?

NO, our software logic requires that we always see a secondary confirmation of the user’s intent before we switch the bikes On or Off. For safety reasons, once the Dawg Tag has authorized the ignition to start the bike will not shut off or rearm until 30 seconds after YOU shut off the bikes ignition. If you dropped your Dawg Tag while going down the freeway it would not just “shut off”, you would have to first turn the bike off for the system to arm.

Can it arm and disarm a factory or aftermarket alarm system?

The DGD system will work fine with any other alarm system, but it works independently and does not control the other system.

Is the DGD-KIM also a good security system?

Often the first appeal of the DGD-KIM is its convenience or the coolness factor of not having to use keys, but if the system were rated only for the level of security it provides it would still be one of the strongest on the market.

What makes the DGD-KIM such a powerful security device is the way it works with your bike's electrical system. A common bike alarm or starter interrupt system only kills one circuit on your bike. This is almost always the Starter. But in the case of the DGD-KIM it is hardwired right into the bike whole ignition system, so when it’s armed no other circuit on the bike can even get power. None of the typical “jump from here to here” tricks will work. Your bike’s simply dead weight.

Do the bikes lights come on when I walk up to my bike?

The way the DGD-KIM system works like is; as you approach your bike, the system begins communication to see if you have a valid Dawg Tag with you. If yes, the system “Pre-authorizes” your ignition and accessory circuits, but doesn’t turn anything on. When you flip your Stop / Run switch to “ON” the DGD-KIM sequentially turns your lights, other accessories and ignition on.

If I change the battery to my bike does the Dawg tag need to be reprogrammed?

The Guard Dawg system all have a non-volatile memory and will not lose code when power is lost.

Will I be stranded if I lose my Dawg Tag?

No, Just call our 24/7 Emergency hot line and we can get you started right over the phone.

The pack includes:

(1) DGD-KIM-U Keyless Ignition Control module
(1) DGD-TAG RFID "Dawg Tag" Transponder
(1) DGD-ACC Installation Accessory Pack

Add a Review

I purchased the system for my 2006 Nightrod. I could not be happier with the quality and thoroughness of the kit. I installed it at the same time I replaced my fuel cell, which requires relocation of the ignition. Being able to eliminate that step and go keyless worked out perfect. I can highly recommend this modification to anybody that hates messing with keys and wants some added security for their ride. Thanks, Glenn
Glen Roberson

I just finished installing the Digital Guard Dawg keyless system on my 2006 VRSCA V-Rod, I also bought one for my wife's 2004 VRSCB and cross-program both. I am happy to report that the installation was painless and that the system is working perfectly on my bike. It's great to go keyless! I especially like that all the wires are color-coded just like the H-D stock wires so installation is almost goof-proof. Thanks,
Charlie Herder

Here is my 2004 Harley Davidson Turbo VRSCB V-Rod. I've recently installed the Digital Guard Dawg key less mod. and just love it. My only regret is that I didn't do it sooner. In fact I'm so happy with it that I've just ordered a second one for my 2007 Turbo Night Rod Special.
Pat Mailloux

Love the system! Nice not to have to try to remember to set the alarm, Awesome product!
Melissa Wright

The whole experience of dealing with Digital Dawg was excellent, great advice, easy product install and the KIM just works fantastically. Nothing more to say than I'm yet another happy customer and really enjoying being key less!
Ray Joslin

I just wanted to take a second and say that your product is by far the best mod I have done on this bike. I have had it one for over a year and not one problem with it and the install was easy as well..... I am thinking of getting one linked to my car as well. Thank you for making a great product Thanks,
Gary 95

Going key less was the best modification that has happened on the V-Rod. No more fumbling for keys, just walk up, fire up the bike and ride. The added security is also great as the original ignition switch was removed, giving a potential thief a significant problem.
Bill Chunn

Capitol Police

Awesome upgrade, Its converted my bike to totally keyless! My Softail, won't start unless I'm near it. I walk up, start up, and go! Walk away and it's a big paperweight, I love it. Easy install. Description and directions perfect and easy!
Phil Hicks

In a world where many businesses have lost the willingness and/or responsibility to respect the fact that customers are why they're in business, your company really stands out. Thank you, Digital Guard Dawg for your prompt and courteous staff.
Nick and Nancy Callaway

I am one really happy customer. You guys have a great product that I'm going to tell anyone who listens to me about
Tabitha Bonnie

Being Keyless is Awesome! I love the product, easy to install and the support was terrific. Thanks again Guard Dawg
Ricky Deets

Finished my guard dog install and I love it! No more key to deal with. The ease of this install was unbelievable. Thanks for this product.
Chris Jeansonne

I love being Keyless! Everyone who's seen mine wants one. Thanks for a Great Product!
James Fahey

Every now and then a product comes along that should have been on the bike from the factory. The Digital Guard Dawg is one such product. . .
David Beck

Thanks Digital Guard Dawg. It's way cool not having keys and I never have to remember to protect my bike. Easy Install, great product!
Rick Wilson

Water proof accessory switch for DGD-KIM, KIM -HD, KIM-V K & KIM-V2.

$10.00 each

Ed Lavine's Rockett III