My system is stuck on what do I do ?

This is our most commonly asked question especially for those who are in the middle of building their hotrod. The performance series PBS-I and PBS-II systems are sequence oriented systems, if they are stuck in run mode what most likely happened is it was walked through a start sequence and either the motor was not able to get started, it was stalled out or you are have started testing the system before the engine is capable of running. Since the system was walked through a start sequence all you need to do is walk it through a shutdown sequence, to do this simply put your foot on the brake and then press and hold your start button for about 1 second until everything shuts off.