Harley Sportster 883 / XL883 / Iron 883 (2012 – 2020)

Harley Sportster 883 / XL883 / Iron 883 (2012 – 2020)

| $329.00

Universal Product

Universal Product


Keyless Ignition System for Harleys makes your ignition key a thing of the past!

In a world where security is a necessity and convenience in high demand, keyless technology is the perfect security solution for protecting your bike. The KIM-U Keyless Ignition Module combines advanced RFID security and ultimate keyless convenience all in one amazing product.

The KIM-U uses RFID proximity technology similar to that found on today’s finest luxury keyless vehicles. You simply carry one of the systems digital RFID “Dawg Tags” with you. As you approach your bike, the KIM-U authenticates your unique RFID Dawg Tag and authorizes your ignition automatically. No more need for an ignition key. You just climb on, flip your kill switch to ON, thumb your Start Button and GO!

The KIM-U completely eliminates any need for the factory ignition switch and all the hassles associated with using a key! When your ride is over, flip your kill switch to OFF and you just walk away . . . . . , the KIM-U will automatically arm, completely immobilizing your ignition system and leaving your motorcycle fully secured!

An unlike common alarms that only lockout the starter circuit, The KIM-U provides dual point immobilization of your motorcycles electrical system, locking out both your Ignition and Fuel circuits. It’s impossible to ever forget to protect your bike, it’s all automatic! No more keys to hassle with, No more wheel locks or chains to carry around, No more forgetting to arm your alarm, and no false alarms ever, just absolute “Hands Free” keyless convenience and powerful security.

Additional information

Add Extra Fob

NO, 1, 2

Add GPS Tracker

None, Add GPS, GPS + Starter Lockout

Button Type

Billet, Black Anodized

Button Color

Blue, Red, Green, White, Yellow, Orange


Advanced Design
The KIM-P harnesses the power of microelectronics to offer an impressive array of features in a compact design. With cutting-edge high load micro relays, it delivers exceptional performance by independently switching Ignition and Accessory circuits, ensuring optimal power handling and precise control.
To safeguard against moisture and minimize vibration, the KIM-P is securely sealed within a specially formulated RTV compound. This protection ensures its durability and reliability even in challenging environmental conditions. Remarkably, the module’s small footprint measures only 1½” X 1½” X 2″, allowing for versatile mounting options. You can conveniently install it in various locations, making it adaptable to the specific needs of your setup.
RFID Dawg Tag
Experience the seamless operation of your bike’s ignition with RFID (Radio-Frequency Identification) Dawg Tags. These advanced tags offer a truly “Hands-Free” experience by activating based on motion and authorizing your ignition only when you are within range. Each Dawg Tag boasts a unique code with over 6 billion different combinations, ensuring exceptional security. What’s more, Dawg Tags can be cross-programmed, allowing a single tag to operate multiple bikes for added convenience.
With the Dawg Tag, you have the flexibility to choose between Automatic or Manual modes, providing complete control over the system’s arming and disarming. Embrace tomorrow’s future technology today by being at the forefront of keyless innovation with the KIM-P Ignition Module. Soon enough, all bikes will be keyless, but as an early adopter, you can relish the benefits and excitement of cutting-edge technology. Stay ahead of the pack with the KIM-P Ignition Module.
No More Keys!
Say goodbye to the frustration of searching for keys with your gloves on or risking scratches on your paint. No more fumbling with keys or worrying about them falling out of your pocket and getting lost. Just imagine the joy of being able to effortlessly “get on and go, then get off and walk away,” knowing that your bike is fully protected whenever you’re not around. Losing your keys has never felt so liberating! Experience the convenience and peace of mind that comes with a keyless system.
Easy Installation
Insert and securely fasten the Billet Button into the Teardrop bracket, the old ignition switch housing, or any 25mm hole using the provided locking nut. Plug the Button into the system harness. Locate the harness behind the keyswitch and plug it in. Attach the ground wire and the red 12V wire to the battery. Once these steps are completed, your installation is finished! You can now enjoy the convenience of a keyless system with no more need for traditional keys.
Programmable Bypass Code
Never find yourself stranded! In the event that you damage or misplace your Dawg Tag, there’s no need to fret. You can still start your bike by entering your user-programmable Bypass Code. Simply input the code using your Run/Stop switch, and you’ll be back on the road in no time. Rest assured knowing that even without the Dawg Tag, you have a reliable backup method to keep your bike running smoothly.
Quality Engineered
The KIM-P is purposefully designed to excel in even the most demanding environments. Its sealed control module is constructed with military-grade FR-4 circuit boards, featuring ultra-low profile SMT components that offer exceptional durability and reduced resonance during high vibration scenarios.
To guarantee consistently superior product quality, all KIM systems undergo rigorous testing. They are manufactured in adherence to stringent ISO 9001 and TS16949 OEM automotive certifications, ensuring the highest standards are met. With the KIM-P, you can trust in its rugged construction and reliable performance, even in the toughest conditions.


2010 Honda Phantom
Triumph Rocket III with KIM
2019 Indian Scout
Full Install Video Series

GPS Tracker

Guard Dawg 5G trackerThe Guard DawgTracker’s advanced design provides the highest level of Protection and most reliable 5G Tracking money can buy!. Always know where your vehicle is.
  • Theft Alert
  • Tow Alert
  • Ignition On Alert
  • Low Battery Alert
  • Remote Starter Lockout Option
  • Automatically sets a 150 ft Theft Fence every time you park
Mobile app shows Satellite, Map and Street Views with pinpoint accuracy! Updates your vehicle’s position every 2 minutes


  • 5G Real-Time Satellite Tracking with pin point accuracy
  • Easy to use IOS & Android mobile app displays Satellite, Map and Street Views
  • IP67 rated waterproof sealed enclosure designed for heavy vibration
  • Won’t drain your battery like inexpensive tracking systems
  • Updates vehicle position every 2 minutes
  • Backup Lithium Ion battery that can lasts for days
  • US Based tech support
  • Exclusive Power Management Circuitry – ultra-low current protects against battery drain
  • Works right out of the box

Receive Alert Notifications For:

  • Ignition on alert
  • “Theft Fence” automatically activates every time you park
  • After hours use alert
  • Towing alert
  • Low battery alert
  • Geo-fence violations
  • Excess speed alert
  • Remote starter lockout (optional)

What Makes The Guard Dawh Tracker Better?

4G vs. 5G Systems

What good is a tracking system if it can’t tell you where your bike is? Many tracking systems are still using the old 3G network for their communications. Everyday 3G towers are coming down, resulting in less coverage area. Currently all major cell carriers are scheduled to retire their 3G networks by the end of 2020 making 3G systems obsolete. Only 5G cellular service gives you long term border to border and coast to coast coverage.

Power Draw vs. Locating Accuracy

Most GPS systems that claim to be motorcycle trackers make a critical compromise in their design. Motorcycles batteries are small, to save current draw on the bikes battery, they reduce “how often” their system reports your bikes actual location. Some inexpensive GPS systems only report the “actual” location of your bike once or twice a day, leaving you with less then accurate location info when you may need it most. Guard Dawg Tracker has solved this issue with our revolutionary new“APMC” (Advanced Power Management Circuitry).By cycling the system into a deep sleep / power saving mode when your bikes is motionless, then waking it up when the system detects motion, we achieve a ultra-low current draw protecting against battery drain while still providing “Real Time” GPS location info, updating every 2 minutes with pin point accuracy.


  • Dual-Band LTE Cat 1: Bands 4, 13
  • Tri-Band LTE Cat 1: Bands 2, 4, 12
  • Location Technology: 56 channel GPS
  • Tracking Sensitivity: -162 dBm
  • Location Accuracy (open sky): +/- 2.5m
  • Cold Start Acquisition: 29 seconds
  • Hot Start Acquisition: 1 second
  • LED Status Indicators: Cellular, GPS
  • Input Power Range: 6-36VDC
  • Tracking Mode: 65mA @ 12VDC
  • Sleep Mode: 2mA @ 12VDC
  • Backup Battery: 400 mAh rechargeable Lithium-ion
  • Operating Temp: -30º C to 80º C
  • Dimensions: 4.4 x 2.2 x 0.7
  • Weight: 100g
  • ROW: CE, GCF, e-Mark, RoHS2


The KIM module has been engineered with a specific safety precaution in mind. When it comes to the Dawg Tag, its presence is required for authorization to start the bike, but it’s not necessary to keep the bike running. This design allows for a seamless riding experience, even if the Dawg Tag falls out of your pocket while cruising on the freeway or if its batteries happen to die during your ride. In such situations, you won’t encounter an unexpected bike shutdown. The KIM module’s intelligent functionality ensures that you can enjoy your ride without interruptions while maintaining the highest level of safety.
The appeal of the DGD-KIM goes beyond just its convenience or the coolness factor of keyless operation. In terms of security alone, this system stands out as one of the most robust options available on the market. What sets the DGD-KIM apart as a powerful security device is its integration with your bike’s electrical system. Unlike common bike alarm or start interrupt systems that only disable the start circuit, the DGD-KIM is seamlessly integrated into the entire ignition system. Once armed, no other circuit on your bike can receive power, rendering any attempt to bypass or manipulate the system ineffective. None of the typical tricks involving jumping connections or wires will work. Your bike becomes nothing more than dead weight, providing you with the utmost security and peace of mind.
The installation process for the DGD-KIM is straightforward and can be rated as a “2 beer install” on the Guard Dawg Install Scale. To begin, you’ll need to locate your bike’s ignition switch connector, usually positioned approximately 6-9 inches from the ignition switch. Simply unplug the ignition switch and connect our system. Next, find the stop/run connector, typically located in the headlight bucket, and unplug the connector before connecting our system. Lastly, run a wire to the negative side of your battery. Once these steps are completed, it’s time to crack open your second beer and test out your new keyless ignition system. Cheers to a successful installation!
The Dawg Tag, which operates using two CR2032 batteries, is recommended to have its batteries replaced on an annual basis. However, the actual duration of battery life may vary depending on usage, typically ranging from 1 to 3 years. It is important to consider your specific usage patterns to determine when it is necessary to replace the batteries for optimal performance.
Absolutely! The system is designed to be highly flexible and can learn an unlimited number of Dawg Tags. Whether you have one bike or a whole fleet, you can easily add as many Dawg Tags as you need to the system. This means that each rider can have their own unique Dawg Tag for seamless and convenient access to their respective bikes. Simply program the additional Dawg Tags and enjoy the convenience and security of keyless operation across all your motorcycles.
Absolutely! With the Digital Guard Dawg system, one Dawg Tag has the capability to control multiple bikes. Each system can learn an unlimited number of Dawg Tags, allowing you to program each Dawg Tag to operate any of your bikes equipped with Digital Guard Dawg systems. This means you can enjoy the convenience of using a single Dawg Tag to access and start different motorcycles within your collection. Whether you have a diverse lineup of bikes or want to share access with fellow riders, the system offers the flexibility to accommodate your needs.
No, when you walk up to your bike, the brake lights do not automatically come on. The DGD-KIM system operates as follows: as you approach your bike, the system initiates communication to determine if you have a valid Dawg tag. If you possess a valid tag, the system “pre-authorizes” your ignition and accessory circuits, but it does not activate any components until you switch your stop/run switch to the “on” position. Once the switch is turned on, the DGD-KIM system sequentially activates your Ignition, Accessories, and lights.
No, you do not need to reprogram the Dawg Tag if you change the battery in either your bike or the Dawg Tag itself. The Dawg Tags are designed with non-volatile memory, which means they retain their programming even if there is a loss of power to either the Dawg Tag or the module. Therefore, replacing the battery will not affect the programming of the Dawg Tag.
Whether or not your insurance company will provide a discount for having this system installed depends on the policies and guidelines of your specific insurance provider. It is important to note that this system offers a “3 point immobilization” feature, which effectively secures and immobilizes all electrical systems of your bike. To determine if your insurance company offers discounts for such security systems, it is advisable to contact them directly and inquire about their policies regarding anti-theft measures and potential discounts.
If you wish to listen to the radio while at a car/bike show without running the entire ignition system, you have the option to add our optional Accessory switch. This switch allows you to independently activate your ACC (Accessory) circuit without engaging the ignition system or requiring the Dawg Tag. This feature is particularly useful when you’re at a show or a BBQ and may not be near your bike the entire time but still want to power LED lighting or the radio. It’s important to note that even with the Accessory switch activated, your bike will remain protected from unauthorized use because you will not have the Dawg Tag with you, preventing anyone from attempting to start and ride your bike.
If you happen to lose your Dawg Tag, there is a solution in place. All you need to do is enter your user programmable bypass code using the stop/run switch, which will allow you to start your bike. After that, it’s recommended that you contact us promptly, and we will expedite the process of providing you with a replacement fob. By reaching out to us, we can assist you in obtaining a new Dawg Tag as quickly as possible.
Yes, each Dawg Tag is equipped with its own unique digital code, which is one out of over 6 billion possible codes. The system is designed to learn and recognize the individual serial number of each tag. This ensures that each Dawg Tag is distinct and can be identified separately by the system, enhancing the security and accuracy of the overall system.
Yes, the DGD-KIM system is designed to be protected against “Code Grabbers.” Each Dawg Tag utilizes a “rolling code” mechanism, which means that when the tag sends a code to the module, the next time they communicate, a different code is used. This rolling code system employs a complex algorithm that ensures even if someone were to intercept and steal a code, it would become invalid and unauthorized during the next communication between your system and the Dawg Tag. This security measure prevents unauthorized access and enhances the overall protection provided by the system.
Each Digital Guard Dawg System includes one Dawg Tag as standard. If desired, you can purchase additional Dawg Tags separately and program them into the system. There is no fixed limit on the number of Dawg Tags that can be programmed per system, providing flexibility for your needs. You have the option to add as many Dawg Tags as necessary, allowing you to expand the system and configure multiple Dawg Tags to work with a single system or distribute them among multiple systems as desired.
Yes, the DGD-KIM is designed as a fully sealed unit, ensuring its water resistance. It is classified as IP67, which indicates that it is highly water resistant. The system has undergone testing and has been proven to operate correctly even after being fully submerged underwater for a duration of over 5 minutes. This level of water resistance provides confidence in the module’s durability and reliability even in wet or damp conditions.
Alarm systems and Keyless Ignition systems approach the issue of theft in different ways. The Keyless Ignition system eliminates the need for keys and allows for easy activation of the bike by simply flipping the Stop/Run switch and pressing the start button. It offers convenience and eliminates the hassle of using keys. While the DGD-KIM system provides this convenience, it also offers a high level of security. Even if it were evaluated solely based on security, it would still be considered one of the strongest systems available.
In comparison, traditional alarm systems typically have a “starter interrupt” feature that only disables the starter circuit. This leaves the bike vulnerable to being jump-started or hot-wired directly to the starter. The DGD-KIM, on the other hand, is integrated into the bike’s entire ignition system through a hardwired connection. When armed, no other circuit on the bike receives power, rendering it immobilized. Traditional methods of bypassing or hot-wiring the bike’s ignition system become ineffective, making the bike completely inoperable.
As for alarm sensors, such as single, dual, or triple-axis sensors, they may sound appealing but they often result in frequent false alarms due to environmental factors like rain, wind, or passing vehicles. Moreover, the limited space available on most motorcycles makes it challenging to securely mount a siren that cannot be easily located and disabled within seconds.
Overall, the DGD-KIM system offers a powerful combination of convenience, keyless ignition, and robust security that sets it apart from traditional alarm systems.
No, the DGD-KIM system will not void your warranty. Over the past 15 years of selling the DGD-KIM series of systems, we have not encountered a single manufacturer’s warranty issue.
The Dawg Tag utilizes two CR2032 batteries.
Yes, the DGD-KIM system is designed as an independent unit, allowing it to work seamlessly with both aftermarket and stock alarm systems. Whether you have an existing alarm system installed or plan to add one in the future, the DGD-KIM system can integrate and operate effectively alongside it. Its independent nature ensures compatibility and flexibility with various alarm systems, enhancing the overall security features of your bike.
If your Dawg Tag looks different from the one shown online or you require replacement Dawg Tags for an older system, please contact us directly at 877-246-5395. Our customer service team will assist you in obtaining the appropriate Dawg Tags that are compatible with your specific system. They can provide you with the necessary information and guidance to ensure you receive the correct replacement Dawg Tags.



  • KIM module size: 2” x 1.5” x 1.5”
  • 12V DC
  • Current Handling 2 x 30A
  • Idle current draw 8mA
  • Battery CR2032
  • Ignition Harness 36”
  • Stop / Run Harness 36”
  • Ground wire 60″


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.