11

DGD M-24

From: $399.00

Clear
SKU: KEYLESS HUMVEE M-24 Category:

Description

In a world where security is a necessity and convenience is king, RFID keyless technology is the perfect security solution for protecting your Humvee. The DGD-M24 Keyless Security Module keeps your dash looking authentic, while it protects you with powerful RFID security and provides effortless keyless convenience all in one amazing plug & play product. The M24 uses RFID proximity technology similar to that found on today’s finest luxury vehicles. You simply carry one of the systems digital RFID “Dawg Tags” with you. As you approach your Humvee, the M24 authenticates your unique RFID Dawg Tag and authorizes your ignition automatically. You just climb in, flip your start switch to ON, Start and GO! When your adventure is over, just switch off your engine and you just walk away . . . . . As you leave proximity of your Humvee, the M24 automatically arms and your Humvee is completely secured. No keys to hassle with, No buttons to push, just absolute convenience and powerful security. The M24 is proudly made in the USA and custom engineered for complete Plug-N-Play installation on all M998, M1097, M151 and M151A1 models. With no wires to cut or splice, installation is a breeze. Simply swap your existing ignition switch wires to the M24 harness, attach the ground wire and you’re ready to go!

Features

Advanced Design

The M24 boasts huge features in a rugged package. High load 24 Volt relays independently switch Ignition and Starter circuits providing optimum power handling and control. Outfitted with genuine Packard Connectors, heavy gauge wiring and sealed with a specially formulated RTV compound to protect from moisture and dampen vibration, total module size is only 3″ x 4½” x 1 ½” allowing it to mount virtually anywhere.

RFID Dawg Tag

RFID (Radio-Frequency Identification Device) Dawg Tags provide completely “Hands Free” operation of your Humvee ignition. Dawg Tags are motion activated and will only authorize your Ignition to operate when you are within a close range. Each Tag is completely unique with over 6 billion different code combinations. Dawg Tags can be cross-programmed allowing one tag to operate multiple vehicles. You can also easily select between Automatic or Manual modes, via the Dawg Tag, giving you complete control of how and when the system arms and disarms.

Strong Security

When we say secure we mean it! When the M24 arms, every circuit on your Humvee is completely immobilized! No other product gives you this level of protection. When you kill the engine, you just walk away… “Hands Free” auto arming will completely disable your Humvee’s ability to be operated, The M24 is the most advanced and effective security available today!

Plug-N-Play Installation

The M24 kit includes everything you need to add the awesome convenience of complete keyless security to your Humvee. Our innovative Plug-N-Play harness uses factory connectors to interface with your Humvee Ignition system without cutting any wires, Even if you have no installation experience you can easily add this awesome accessory to your Humvee in under an hour.

Videos

FAQs

Does the Bike shut off if I walk away with the Dawg Tag?

No, the KIM module only needs to see the Dawg Tag for Authorization to start not to keep running, we designed the system this way as a safety precaution in case the Dawg Tag fell out of your pocket while riding down the freeway or the batteries died while you were on a ride.

Is the DGD-KIM a good security system?

Often the first appeal of the DGD-KIM is its convenience or the coolness factor of not having to use keys, but if the system were rated only for the level of security it provides it would still be one of the strongest on the market. What makes the DGD-KIM such as powerful security device is the way it works with your bikes electrical system. A common bike alarm or start interrupt system only kills one circuit on you bike. This is almost always the start circuit. In the case of the DGD-KIM it is hardwired right into the bikes whole ignition system, so when it’s armed no other circuit on the bike can even get power. None of the typical “jump from here to here” tricks will work. Your bike’s simply dead weight.

How hard is the install?

The installation is very straight forward and is only rated as a 2 beer install. You will need to locate your bikes ignition switch connector, typically this is about 6-9 inches from the ignition switch, you will just unplug the ignition switch and plug us in. Next you will locate your stop/run connector, typically this is located in the headlight bucket, unplug the connector and plug us in. Finally just run a wire to the negative side of your battery, after that crack open your second beer and test out your new keyless ignition.

When do I have to replace the battery in my Dawg Tag?

We recommend changing your batteries once a year, depending on use you can expect to get 1-3 years out of your Dawg Tag batteries.

Can I add addition Dawg Tags to my system?

Yes, Each system can learn up to four unique Dawg Tags. If you have numerous bikes you can program each of your Dawg Tags to operate any of your bikes.

Can one Dawg Tag control numerous bikes?

Yes, Each system can learn up to four unique Dawg Tags. If you have numerous bikes you can program each of your Dawg Tags to operate any of your bikes.

Do the bikes lights come on when I walk up to my bike?

No, The way the DGD-KIM system works is like this; as you approach your bike, the system begins communication to see if you have a valid Dawg tag with you. If you have a valid tag the system “pre-authorizes” your ignition and accessory circuits, but doesn’t turn anything on until you flip your stop/run switch to “on”, then the DGD-KIM sequentially turns on your Ignition, Accessories and lights.

If I change the battery in either my bike or Dawg Tag do I need to reprogram the Dawg Tag?

No, The Dawg Tags utilize non-volatile memory and will not lose their programming if either the Dawg Tag or the module loses power.

Will my insurance company give me a discount for having this system installed?

Each insurance company is different, this system provide a “3 point immobilization” and locks down your entire bikes electrical systems.

What if I want to listen to the radio while at a car/bike show but not run the entire ignition?

You can add our optional Accessory switch which enables you to turn on your ACC circuit independent from your ignition system as well as the Dawg Tag, this is a great option if you are at a show or even just a BBQ and you won’t be at your bike the whole time but want to run LED lighting or the radio. Your bike will still be protected from someone attempting to hop on and ride because you will not be there with the Dawg Tag.

What If I lose my Dawg Tag?

Simply give us a call 24/7 at our Emergency Hotline number 877-246-5395 and one of our techs can get you started right over the phone then overnight ship a replacement Dawg Tag to you.

Does each Dawg Tag have a different code or frequency?

Each tag has its own unique digital code, one in over 6 billion. The system learns your tags individual serial number.

Is the DGD-KIM protected against “Code grabbers”?

Yes, each Dawg Tag uses what’s called “rolling code” meaning that when it sends a code to the module, the next time they communicate they will use a different a code. This code uses a complex algorithm; so that even if someone stole your code, the next time your system and Dawg Tag communicate the old code that was “grabbed” is no longer valid and will no longer authorize the module.

How many Dawg Tags come with a system?

Each Digital Guard Dawg System comes with (1) Dawg Tag included. You can purchase extra Dawg Tags and program up to (4) per system. Extra Dawg Tags can be added any time. You can also program a single tag into multiple systems so that you can operates all you Motorcycles or Vehicle by carrying just one Dawg Tag.

Is the DGD-KIM Water proof?

The DGD-KIM is a fully sealed unit, we classify the module as IP6 “highly water resistant”. The system has been tested to operate correctly after being completely submerged underwater for over 5 minutes.

What about Alarm sensors or sirens?

Alarm systems and Keyless Ignition systems They approach the problems of theft in two completely different ways. The Keyless Ignition eliminates your ignition switch and makes it so you never have to use keys, Just walk up flip your Stop/Run switch, thumb the start button and go. When you’re done riding you just walk away. Its true that often the first appeal of the DGD-KIM is its convenience or the coolness factor of not having to use keys, but if the system were rated only for the level of security it provides it would still be one of the strongest on the market. Alarms typically will have a “starter interrupt” which only kills (1) circuit on your bike, “The Starter” this leaves the bike vulnerable to simply being jump started or simply hot wiring to the starter. What makes the DGD-KIM such a powerful security device is the way it works with your bikes electrical system. In the case of the DGD-KIM it is hardwired right into the bike whole ignition system, so when it’s armed no other circuit on the bike can even get power. None of the typical “jump from here to here” tricks will work. Your bike’s simply dead weight. Regarding, Single, Dual or Triple Axis sensors; As cool as they all sound, simply because of the environment a motorcycle lives in, we have never seen one that doesn’t have frequent false alarms from rain, wind or a truck driving by, this is why we don’t try and detect bumps. Also due to the limits of space on most motorcycles, it’s also extremely hard to mount a siren on a bike that can’t be found and disabled in a matter of seconds.

Will the DGD-KIM void my warranty ?

Not at all, We have been selling the DGD-KIM series of systems for over 5 years and have never had a single manufactures warranty issue.

What type of battery does the Dawg Tag use?

The Dawg Tag uses (2) CR2032 batteries.

Will the system work with my aftermarket or stock alarm system?

Our unit is an independent unit so it will work fine with any aftermarket or stock alarm system.

How many Dawg Tags does the system come with?

All of our systems come with 1 Dawg Tag, you can always add additional Dawg Tags to your system, it just requires giving us a call.

My Dawg Tag looks different than the one you guys show online

If you need replacement Dawg Tags for an older system please give us a call at 877-246-5395.

Manuals

Specs

Module Size 3″ x 4½” x 1 ½”

Weight 10 oz

Operating Voltage 24 Volt

Current Handling 2 / 24V x 35A

I purchased the system for my 2006 Nightrod. I could not be happier with the quality and thoroughness of the kit. I installed it at the same time I replaced my fuel cell, which requires relocation of the ignition. Being able to eliminate that step and go keyless worked out perfect. I can highly recommend this modification to anybody that hates messing with keys and wants some added security for their ride. Thanks, Glenn

Glen Roberson

I just finished installing the Digital Guard Dawg keyless system on my 2006 VRSCA V-Rod, I also bought one for my wife's 2004 VRSCB and cross-program both. I am happy to report that the installation was painless and that the system is working perfectly on my bike. It's great to go keyless! I especially like that all the wires are color-coded just like the H-D stock wires so installation is almost goof-proof. Thanks,

Charlie Herder

Here is my 2004 Harley Davidson Turbo VRSCB V-Rod. I've recently installed the Digital Guard Dawg key less mod. and just love it. My only regret is that I didn't do it sooner. In fact I'm so happy with it that I've just ordered a second one for my 2007 Turbo Night Rod Special.

Pat Mailloux

Love the system! Nice not to have to try to remember to set the alarm, Awesome product!

Melissa Wright

The whole experience of dealing with Digital Dawg was excellent, great advice, easy product install and the KIM just works fantastically. Nothing more to say than I'm yet another happy customer and really enjoying being key less!

Ray Joslin

I just wanted to take a second and say that your product is by far the best mod I have done on this bike. I have had it one for over a year and not one problem with it and the install was easy as well..... I am thinking of getting one linked to my car as well. Thank you for making a great product Thanks,

Gary 95

Going key less was the best modification that has happened on the V-Rod. No more fumbling for keys, just walk up, fire up the bike and ride. The added security is also great as the original ignition switch was removed, giving a potential thief a significant problem.

Bill Chunn

PROUD CHOICE OF THE CAPITOL POLICE WASHINGTON, D.C.

Capitol Police

Awesome upgrade, Its converted my bike to totally keyless! My Softail, won't start unless I'm near it. I walk up, start up, and go! Walk away and it's a big paperweight, I love it. Easy install. Description and directions perfect and easy!

Phil Hicks

In a world where many businesses have lost the willingness and/or responsibility to respect the fact that customers are why they're in business, your company really stands out. Thank you, Digital Guard Dawg for your prompt and courteous staff.

Nick and Nancy Callaway

I am one really happy customer. You guys have a great product that I'm going to tell anyone who listens to me about

Tabitha Bonnie

Being Keyless is Awesome! I love the product, easy to install and the support was terrific. Thanks again Guard Dawg

Ricky Deets

Finished my guard dog install and I love it! No more key to deal with. The ease of this install was unbelievable. Thanks for this product.

Chris Jeansonne

I love being Keyless! Everyone who's seen mine wants one. Thanks for a Great Product!

James Fahey

Every now and then a product comes along that should have been on the bike from the factory. The Digital Guard Dawg is one such product.

David Beck

Thanks Digital Guard Dawg. It's way cool not having keys and I never have to remember to protect my bike. Easy Install, great product!

Rick Wilson

Reviews

You may also like…