PBS-MX

From: $289.00

SKU: N/A Category:

Description

PBS-MX for ATV & UTV’s

Now every Off Road enthusiast can enjoy the unparalleled convenience and security of the latest in Keyless ignition technology. Now you can operate your ATV, UTV with just the touch of a button! The PBS-MX can be added to any 12 volt ATV or UTV.
Using advanced RFID technology (Radio Frequency Identification) just like that found on world’s finest luxury vehicles, the PBS-MX completely eliminates your ignition key switch and provides high security protection against theft!
RFID (Radio Frequency IDentification) is the wireless authentication technology that is rapidly transforming the world into a completely “Keyless” society. The PBS-MX uses the same high security & convenience technology found on today’s most advanced luxury vehicles to provide you the ultimate in convenience and protection for your vehicle.
Simply carry the systems RFID M-Tag Key fob with you, as you approach you boat, the PBS-MX control module will authenticate the digital serial number of your M-Tag; authorize your ignition system, then with just a push of the systems start button your engine roars to life!
No more fumbling with keys. Simply carry one of the systems digital RFID Dawg tags with you. As you approach your vehicle, the PBS-MX verifies your identity, authorizes your ignition and with just the “Push of a Button” your engine roars to life!
When you’re done riding, another push turns your engine off and you just walk away. The PBS-MX automatically arms and your entire ignition is immobilized.
The PBS-MX M-Tag Fobs are plated in a thick layer of chrome and are not only beautiful, but fully waterproof as well! The systems Start Button also has an IP68 waterproof rating and is made of brushed stainless steel start with a blue “halo” LED that informs you of system status. Now you can lose your keys for good and enjoy the freedom of being completely keyless!
Losing Your Keys Never Felt So Good!
FEATURES
  • Designed for Harsh, Wet Off Road Environments
  • Waterproof Billet Start Button / IP69 rated
  • Dual Mode RFID Transmitters provide both Manual & Automatic operation
  • Simple Installation
  • Emergency Bypass Code assures starting even if you lose your RFID Transmitter.
  • Proudly made in the USA

Features

Revolutionary RFID M-Tag

The M-Tag provides completely keyless operation of your Boats Ignition. It automatically transmits its unique authorization code as you come into proximity of the PBS-M reader module. Just push your start Button and Go! M-Tags heavy plated chrome housing makes it both beautiful and rugged. Can be set to operate either in Automatic Mode or Manual Mode. M-Tags are 100% waterproof and specifically designed for Marine applications.

Powerful Protection

The PBS-M uses the latest advances in RFID technology to deliver a level of security even better than many OEM keyless systems. Each Dawg Tag is completely unique, one of over 6 billion different codes.

Start Button with LED Status Indicator

The PBS-M comes with a 22mm Billet style Start Button Switch, Made of top quality stainless steel, this heavy duty cycle switch has an attractive “soft brushed” finish and carries a IP69 water proof rating An Illuminated halo LED ring indicates system operation status. Start Buttons are available in 3 LED colors; RED, BLUE or GREEN. Switches are pre-wired to a 36″ plug in harness.

Emergency Bypass Code

Each PBS-M system has a user programmable Bypass Code. Should you ever lose or damage your Dawg Tag, you can still start your engine by simply entering your unique bypass code via the systems start button.

FAQs

Will the system control two motors?

Each PBS-M system will only control 1 motor.

Is the PBS-M system waterproof?

The PBS-M module is water resistant and should be installed somewhere safe for electrical equipment. Both the Dawg Tag transmitters and system Start Button are 100% waterproof and carries a IP69 rating.

How Many M-Tag come with the system?

The PBS-M comes with one M-Tag, to add additional M-Tags please select how many you would like from the drop down.

I have a Diesel will the PBS-M work for my vehicle?

The PBS-M systems will work with diesel vehicles, In the programming features of the PBS-M you are able to set a starter delay if you need to give your glow plugs a moment to prime.

What type of batteries do the M-Tags use?

Our M-Tags user a Lithium Coin Battery the last 1 YR +

Can I use one M-Tag to authorize both of my motors?

Yes, While the PBS-M will only control 1 motor, you can use the same M-Tag to authorize both of your PBS-M modules.

How difficult is the installation?

The installation is very straight forward and only requires connecting the PBS-M to your existing Ignition Switch wires.

Can the system use a different button rather than the ones you supply?

Yes, You can use any momentary 12V button you like.